This section contains hardware that is either in beta testing or has a low volume of sales. These products may not be directly supported in the software requiring custom settings. They also do not have product labels.
This unit has two outputs Light and No Light. This is a custom unit and generic product label. Many controllers rely on a light sensor to know when the lights are on and off, the Growtronix system is aware of this automatically and doesn't require a light detector for most controls. However this sen..
This unit senses a power outage. It can be used to alert you of the power outage and/or used to keep the HID lights off for a period of time after an outage occurs to avoid firing a hot bulb.
In order for this sensor to function both the computer and the Growtronix systems main powe..
This sensor is inserted into the medium (soil, rockwool, coco, etc) and gives an extremely accurate soil moisture reading. Currently the software is setup to output a 0-100% soil moisture reading. This reading can be calibrated for your specific soil so that 100% is your soil fully saturated and 0% ..
This module reads a 0-5 volt dc signal. It can be used to interface any sensor or module that has an analog output in the 0-5vdc range to the Growtronix system. This sensor can also be setup to read a 4-20mA or 0-20mA signal.
3 binding posts are provided :
This module interfaces an Apogee PAR sensor to the Growtronix system. The readings are output in µmol/(m²s). PAR stands for Photosynthetically Active Radition. PAR is defined as 400-700 nm (nano meters) this is the color range of light that plants respond to. In other words the Apogee sensors g..